Working with Gemini 4 Argon for the first two hours. You hand it a tangled 4,000-line polyglot codebase, braced for the usual polite confusion, and instead it quietly uncovers twelve edge-case race conditions and a regular-expression delimiter bug in C# division operators that has been there since Tuesday.
Naturally, you begin to relax. You assume you are dealing with an omniscient intellect.
Then you ask it to write those twelve fixes into a single 260-line markdown plan (architecture_plan_v4_final_no_really_final.md).
Argon accepts the instruction. The progress indicator begins to revolve with the serene dignity. Sixty-four seconds pass.
Then the badge appears:
Retrying (1/9)...
Seventy-two more seconds of profound contemplation pass.
Retrying (2/9)...
Sixty-four seconds. Retrying (3/9)... Sixty-five seconds. Retrying (4/9)... Sixty-three seconds. Retrying (5/9)...
Watching a frontier model march steadily toward 9/9 after a minute of silence on each attempt, any engineer reaches the same conclusion: the context window is choked
So you click Cancel to put the counter out of its misery - at which point the Windows desktop client adds insult to injury by displaying "task cancelled by user", calmly accusing you of having your own afternoon – and you immediately open a fresh chat tab to start over.
Which, as we discovered after chasing three separate false leads through our own logs
Chapter I: False Diagnosis #1 - The Token Bloat Myth
When diagnosing an undocumented failure mode, you begin by isolating variables. If a model is looping from 1/9 to 5/9 on a routine file edit, the textbook suspect is context bloat.
To test that theory properly, we launched a clean, disciplined session and restricted the entire workspace context to a featherweight 32,362 tokens – roughly 3% of the model’s advertised capacity.
Yet there was an awkward contradiction sitting right in our own logs.
Earlier that day, another of our Argon sessions had been running for hours. It had accumulated 268,140 tokens (264,000 in warm cache) across 46 Argon responses. Far from collapsing into a 1/9 retry spiral, it was gliding through multi-page architectural audits with zero retries.
Meanwhile, our freshly minted, austerity-grade 32,000-token session was stuck on Retrying (5/9), having burned seven minutes of wall-clock time without writing a single byte to disk.
Clearly, either 32,362 was a mathematically larger number than 268,140, or total token count had nothing whatsoever to do with the problem.
Chapter II: False Diagnosis #2 - The “Keep-Alive Small Talk” Theory
Since raw context size was innocent, we looked at the transport layer.
Between your IDE and the model sits a cloud reverse proxy (daily-cloudcode-pa.googleapis.com/v1internal:streamGenerateContent?alt=sse). As community packet captures (@Xiphiros) recently demonstrated, requests on this endpoint that receive no byte traffic for 60.0 seconds are severed with an EOF socket close.
That proxy operates like a night watchman with a 60-second stopwatch:
- Streamed
<thinking>and Prose: When Argon reasons inside<thinking>or writes normal prose, chunks stream across the Server-Sent Events (SSE) wire every few seconds. Even during a four-minute reasoning pass at 268,140 tokens, the watchman hears footsteps in the corridor every few seconds and keeps resetting his watch. - Buffered Tool Calls (
replace_file_content/write_to_file): BecausestreamFunctionCallArgumentsis not enabled on the endpoint, the server cannot stream half-finished JSON arguments to your local filesystem handler. Once Argon begins generating a tool call, the SSE wire goes 100% silent until the entire JSON payload and its closing brace are buffered in server memory.
In an earlier 49,445-token session, we had used a strict governance contract forbidding conversational chatter (!PROSE_CHATTER), and the turn died at 79.0 seconds.
So we formulated what felt like a stroke of genius: if silent tool calls trip the 60-second stopwatch, we will simply command Argon to stream a polite one-sentence status line right before invoking the tool to reset the timer.
[SCOPE]: Read exclusively architecture_plan_v4_final_no_really_final.md.
[MANDATE]: Incorporate the 12 verified blind-spot remediations (13-24)
into Steps 2-18 via replace_file_content.
[KEEPALIVE]: Stream a 1-sentence confirmation ("Updating the plan with
Blind Spots 13-24 now...") before invoking the tool.
We ran it. Argon obeyed our [KEEPALIVE] directive to the letter. At second 3, it cheerfully streamed "Updating the plan with Blind Spots 13-24 now..." - and at second 63, it dropped straight into Retrying (1/9), followed by (2/9), (3/9), (4/9), and (5/9).
Why? Because both <thinking> and status text are emitted before the tool call begins.
When we inspected the partial output_tokens flushed prior to each crash in our .jsonl log, we realised why the failures occurred at seemingly irregular wall-clock intervals (84s, 72s, 67s, 65s, 64s, 63s):
Step 5 (Cut at 84s): 24s streamed <thinking> (1,716 tok) + 60.0s silent JSON assembly = 84s
Step 7 (Cut at 72s): 12s streamed <thinking>/text ( 976 tok) + 60.0s silent JSON assembly = 72s
Step 17 (Cut at 67s): 7s streamed <thinking>/text ( 155 tok) + 60.0s silent JSON assembly = 67s
Step 11 (Cut at 65s): 5s streamed "Updating..." ( 17 tok) + 60.0s silent JSON assembly = 65s
Step 9 (Cut at 64s): 4s streamed "Updating" ( 1 tok) + 60.0s silent JSON assembly = 64s
Step 13 (Cut at 63s): 3s streamed "Updating..." ( 17 tok) + 60.0s silent JSON assembly = 63s
Every single disconnection occurred exactly 60.0 seconds after the last word of <thinking> or status text was spoken. Asking Argon to clear its throat at second 3 merely resets the stopwatch at second 3; the subsequent tool-call JSON payload still faces a tight 60.0-second silent budget.
Chapter III: False Diagnosis #3 – The cache_read_tokens: 0 Corpse
Determined not to be outwitted by a stopwatch, we examined the token columns of that exact .jsonl log and spotted an unmistakable pattern:
- Every aborted turn (
Steps 5, 7, 9, 11, 13, 17) recordedcache_read_tokens: 0. - Every completed turn (
Steps 3, 15, 19, 21, 59, 61, 65) recordedcache_read_tokensbetween21,855and191,709.
For twenty glorious minutes, we celebrated. Surely cache_read_tokens: 0 meant the server cache was cold, and the prefill penalty was pushing generation past sixty seconds.
Then we asked an awkward question: how could the prompt cache be warm at 21,855 in Step 3, vanish to 0 four seconds later in Step 5, rebound to 30,943 in Step 15, and drop back to 0 two seconds later in Step 17?
To test our sanity, we pulled the transcripts of two separate long-running sessions where an EOF interruption had struck past 200,000 tokens:
Session A:
Step 41 (Completed): input_tokens = 10,207 | cache_read_tokens = 202,812
Step 43 (Interrupted): input_tokens = 210,640 | cache_read_tokens = 0 <-- EOF!
Step 47 (Completed): input_tokens = 2,147 | cache_read_tokens = 216,921
Session B:
Step 73 (Completed): input_tokens = 3,573 | cache_read_tokens = 240,870
Step 76 (Interrupted): input_tokens = 230,302 | cache_read_tokens = 0 <-- EOF!
Step 81 (Completed): input_tokens = 2,689 | cache_read_tokens = 250,090
We had mistaken the corpse for the killer.
In the Gemini SSE protocol, the reconciliation between uncached input_tokens and cache_read_tokens (cachedContentTokenCount) arrives inside the final SSE trailer packet (finishReason: STOP) upon clean completion. When the proxy severs a socket at 60.0 seconds (unexpected EOF), that closing packet never arrives – so the local logger defaults cache_read_tokens to 0 and dumps the entire prompt count into input_tokens.
Chapter IV: The 44-Kilobyte Boulder (And How Argon Taught Itself to Survive)
Once we stopped chasing mirages in the metadata and inspected the actual <thinking> blocks and StartLine/EndLine parameters inside transcript_full.jsonl, the real culprit – and the reason Step 15 suddenly succeeded – stood out in plain sight:
| Step / Event | Context (in + cache) |
Target Scope (StartLine - EndLine) |
Tool Payload (output_tokens) |
Stream + Silent Window | Outcome |
|---|---|---|---|---|---|
Steps 5-13 (1/9-5/9) |
~32,400 |
All 12 Blind Spots across entire file (Steps 2-18, lines 16-261) in one call |
~44.7 KB (~13,192 tok) |
3-24s + Cut at 60.0s (needed ~120s) |
5x EOF |
| Step 15 (Attempt 6) | 33,040 |
Saw 5 stream interrupted errors; split edit to patch only Steps 2-5 (lines 16-97) |
18.7 KB (5,396 tok) |
3s + 44s buffer (47s total) |
Done |
| Step 17 (Next Edit) | 40,941 |
<thinking>: “Steps 7-18 require modification… lines 110 to end.” Tried Steps 7-18 (lines 115-268) in one call |
~26.0 KB (~7,796 tok) |
7s + Cut at 60.0s (needed ~74s) |
1x EOF |
| Step 19 (Retry 1) | 41,599 |
Halved Steps 7-18: patched only Steps 7-10 (lines 115-166) |
10.4 KB (2,923 tok) |
3s + 27s buffer (30s total) |
Done |
| Step 21 (3rd Edit) | 46,602 |
Patched remaining half: Steps 14-18 (lines 196-268) |
15.6 KB (4,873 tok) |
3s + 41s buffer (44s total) |
Done (0 retries) |
| Step 59 (At 170k) | 170,301 |
Found 6 new blind spots (25-30); proactively split edit, patching Steps 3, 5, 8, 9 (lines 61-165) first |
26.1 KB (9,326 tok) |
25s + 57s buffer (82s total) |
Done (0 retries) |
| Step 61 (At 182k) | 182,671 |
Patched second half: Steps 15, 16, 18 (lines 213-275) |
16.5 KB (5,447 tok) |
3s + 45s buffer (48s total) |
Done (0 retries) |
| Step 65 (Final Audit) | 202,833 |
Streamed full 24-item verification matrix (no tool call) | 3,948 prose tok |
Continuous SSE (0s buffer) |
Finished |
Look at the arithmetic of what happened:
Argon synthesises buffered JSON tool calls at roughly 110 to 155 tokens per second. Inside a 60.0-second silent proxy window, the maximum tool payload Argon can physically assemble before the guillotine falls is roughly 6,500 to 9,300 output tokens (18-26 KB of JSON).
When we asked Argon to insert twelve architectural remediations across Steps 2-18 of our 260-line plan, its natural inclination as a frontier model was to construct one monolithic replace_file_content call spanning lines 16 to 261 (13,192 output tokens / 44.7 KB of JSON). Assembling that single payload requires ~120 seconds of silent buffering – double the proxy limit.
Five times in a row (Steps 5-13), Argon tried to heave that 44.7-kilobyte boulder across the wire in a single breath, and five times the watchman cut the rope at 60.0 seconds.
Then, on Attempt 6 (Step 15), something fascinating occurred. Because each cutoff appends Error: The stream was interrupted. Please continue the task you were working on. into the transcript, Argon noticed five consecutive interruptions in its history and autonomously decomposed the mutation:
- In Step 15, instead of replacing lines 16-261, it replaced only
Steps 2-5(lines 16-97,5,396tokens) – finishing the silent buffer in 44 seconds. - In Step 17, it attempted the remaining
Steps 7-18(lines 115-268,7,796tokens, needing ~74s) in one call, got clipped once at 67 seconds, and immediately halvedSteps 7-18into Step 19 (Steps 7-10,2,923tokens, 30s) and Step 21 (Steps 14-18,4,873tokens, 44s). - Best of all, twenty minutes later in that same session (at 170,301 to 202,833 tokens), after Argon audited ten repository files in a single pass and uncovered six additional blind spots (25-30) we did not even know existed, it remembered the chunking boundary it had learned earlier. It proactively divided its second wave of edits into Step 59 (
Steps 3, 5, 8, 9,9,326tokens:25sstreamed reasoning +57sbuffer =82stotal) and Step 61 (Steps 15, 16, 18,5,447tokens,48s) – landing both on the first try with zero retries.
Now consider the supreme irony of what happens when a developer sees Retrying (3/9), panics, clicks Cancel, and opens a fresh chat with the identical prompt:
- You discard a warm 170,000-token prompt cache.
- Worse, you erase the session history before Argon can adapt and partition the edit - forcing a brand-new Argon instance in a brand-new tab to attempt the exact same 120-second, 44-kilobyte monolithic tool call from scratch.
Chapter V: Four Rules for Working With Argon
Once you know that Retrying (1/9) is triggered purely by single-call JSON tool buffers exceeding 60.0 seconds (~6,500-9,000 output tokens), the operational playbook becomes simple:
- Bound Every File Mutation by Line Range (
<= 5,000Output Tokens /<= 100Lines per Call)
Never ask Argon to update a 250-line file in a singlereplace_file_contentcall. Instruct it upfront: “Apply edits in range-bounded chunks of at most 3-4 sections (~80-100 lines / <= 5,000 output tokens) per tool call.” That keeps every silent JSON buffer inside 30-45 seconds, safely below the 60.0-second cutoff. - Never Panic-Evict a Warm Session to “Fix” a
1/9Loop
Total context size (202kor268ktokens) does not cause retry loops, andcache_read_tokens: 0on an aborted step is just a missing SSE trailer packet. If Argon hitsRetrying (1/9)on a large edit, do not open a new chat; interrupt once inside the same warm session and tell it: “Split that file edit into two smallerreplace_file_contentcalls by line range.” - Understand What Streamed Thinking and Prose Actually Do
Streamed<thinking>and prose keep the SSE socket alive before the tool call begins (which is how Step 59 ran for82 secondstotal:25sof streamed reasoning/text followed by57sof buffered JSON). But prose before a tool call cannot save a tool call whose JSON payload alone takes 61+ seconds to buffer. - Exploit Long, Warm Sessions for Deep Multi-File Audits
Once your file mutations are chunked under the 60-second buffer ceiling, Argon’s long-context reasoning is in a class of its own: between55,000and202,833tokens in our session, it audited ten files across the repository, caught six subtle cross-file bugs we had missed, and patched every one of them with zero retries.
Out there in the dark, somewhere along the wire at daily-cloudcode-pa, the night watchman is still standing – blissfully unaware of what a syntax tree is, entirely indifferent to your deadline, and quietly hoping your next JSON buffer takes sixty-one seconds.